The 6 Typical Mistakes That You Might Be Doing

Many people prefer to solve problems on their own rather than seeking expert assistance. While a do-it-yourself strategy can be useful in a variety of scenarios, it is not one of them when it comes to choosing a well water treatment system. A water purification system is a huge time and financial investment, and it is quite easy to do it wrong.

The presence of unclean, stinky water, as well as other issues that may need expert intervention in the future, are all consequences of mistakes that people make while choosing a well-water treatment system.

In this article, we’ll focus on the five most common mistakes that may be easily avoided with a little guidance and effort.

What Is Well-Water Treatment System?

A well water treatment system is an apparatus that treats all forms of water to purify it and remove contaminants from it.

Many of you are oblivious to the significance of the well-water treatment system since you grew up in cities with municipal water and wrongly assume that water is a “natural” resource that can be easily replenished.

However, if you ever have to move to a country house with a private well, the problems of water filtration will become much more apparent. Unlike the city water, the well water could be rusty, filled with silt, smell unpleasant, or contain dangerous germs that can cause illness.

Luckily, there are a variety of water purification systems available in the market to address these concerns. However, investigating each of these systems would take a while, and understanding all you discover is a tough task.

That is why issues with water treatment systems are quite common. People try to pick and fix things on their own without adequate information and study, which leads to massive losses. Here’s a look at some of the most common mistakes individuals make when selecting a water treatment system. Read the article if you don’t want to be one of them and waste your time and money.

The Top 6 Most Common Mistakes Are

  1. Failure to properly evaluate the chemistry of well water
  2. Lacking a basic knowledge of how the well water treatment system operates
  3. Ignoring the core problems of water
  4. Not having knowledge of well flow rate and pressure
  5. Unaware of the broken pressure gauge
  6. Choosing the incorrect water treatment system to address water issues

1.      Comprehensive analysis of the Chemistry of Water

All water treatment systems operate within certain conditions and parameters. So it is important to properly evaluate the chemistry of well water before choosing a treatment system.

Let’s discuss an example for better understanding. Usually, well water is acidic and at the same time also contains a significant amount of iron. And most of the water treatment systems are unable to manage both situations correspondingly.

If the water is acidic, the iron filtering system will not operate. As a result, in order for the iron filtering system to operate, the water must first be treated to neutralize its acidity.

The more you know about your well, the better it is.

It’s important to know as much about your well as possible. The pH balance of water can be affected in a number of different ways by the number of chemicals that can infiltrate into well water from diverse sources, such as commercial, agricultural, and several others. That’s why while choosing a filtration system; you must consider several factors.

A bacteria test is needed if there are sewer systems or animals in the area, like horses or cattle. Basic mineral testing is typically advised for various aesthetic water quality issues, such as unpleasant taste, smell, or perhaps discoloration.

So, before deciding on a system, a thorough study of the chemistry of water is essential. It is not suggested to use a customized strategy without first understanding exactly what is present in the water.

2.      Understand the Operation of Water Pumping System

Understanding how your pump works is critical. Usually, a well uses a submersible pump to pump water from the earth. But if the well is too shallow, then you would require a jet pump that will be utilized at ground level to draw water up from the well to generate the needed water booster to supply the residence.

Moreover, some water treatment systems comprise massive holding tanks. They store the treated water and prevent them from being piped back to the home.

However, some gravity driven filtration systems are also present that use gravity to provide water flow to the home.

When choosing a water treatment system, it’s important to understand the fundamentals of how a well water system works. The style of the treatment technique may have a detrimental effect on the water flow rate within the building.

If you don’t have basic knowledge of the Well-Water treatment system, you risk damage or incomplete water treatment.

3.      Understand the Core Problems of Water

The core water issues that are generating the symptoms of a water problem may not always be evident.

Corrosion of copper pipes can be induced by highly acidic water but it can also be produced by excessively alkaline water. A variety of factors can cause smell, spots, and sediments. It’s important to figure out what’s wrong with the water supply that’s producing the ailments.

  1. Recognize the impact of flow rate and pressure on the water treatment system

Water wells and well pumps are available in a variety of sizes and irrigate at various rates. A well pump may be easily tested to ascertain the accurate flow rate supplied by the pump.

You match the right size water treatment system to the right flow rate if you know the exact flow rate. Almost all well water filtration systems are self-cleaning and must meet a certain flow rate.

The most typical issue is using a water purification system that uses 10 gallons of water. However, the current well pump can only generate 7 gallons a minute. The purification process system fails to orientate effectively after a few weeks and thus becomes contaminated.

The water filter medium can freeze and harden the whole water system inoperable. It’s critical to size a plan so that the flow rates are reached to guarantee that there’s an adequate force to drive the well water via the media layer and raise the media, allowing for complete cleaning.

Water pressure is also very important to consider when choosing a water treatment system. As the water passes through the apparatus, almost all water treatment systems reduce the water pressure.

Before choosing a well water filtration system, it is necessary to know the water pressure from the well pump and pressure system to have adequate water pressure in the washroom and other faucets and household items.

If the pressure isn’t high enough to start with, many decent pump systems may be perfect to work better.

  1. The Consequences of a Damaged Pressure Gauge

Domestic water testing specialists come and perform a full well inspection to present a clear understanding of what’s wrong with the well, how well the system works, what is really needed to keep it running smoothly, and also what type of capability your present system can handle.

Your water pressure will be checked, as well as an examination of your water pressure gauge. Consumers are often ignorant that their pressure gauge is damaged. It can cause difficulties if they attempt to repair it themselves.

6.      Wrong choice of water treatment system

While certain well water treatment systems can remove a variety of contaminants, still no one filtration system can handle each application or contamination in the water.

While selecting the best water filtration system for well water, it’s critical to understand the capabilities of the various water treatment techniques under consideration, as well as the pollutants they remove, the various flow rates they’ll handle, and the water pressures they’ll work at.

However, with DIY domestic water testing or well check, you may choose the wrong water treatment system for your house. This is influenced by how much investigation, study, and total effort you put into selecting the proper water treatment system under your own, but there are instances when the expertise and experience of a specialist are unattainable.

The expense of a residential well examination depends on what ought to be fixed as well as how much harm has been caused as a result of choosing the incorrect method. You may learn more by speaking with other residents who use well water, consulting professionals with experience with water treatment systems, and conducting your own study on local businesses.


We looked at the most common mistakes individuals make when choosing a well-water treatment system in this article. We also spoke about the steps you should take to avoid the damage that an improper water treatment system may do.

You will be better able to choose which water treatment system will work for you if you know the flow rate of your water system, the way each system works, and the requirements of a specific well. On the other hand, a professional can consistently provide you with the finest, reliable, and trusted outcomes.

Mastering how to run a well is not a do-it-yourself activity for the typical consumers. If you want to save money, do your study and discover a cost-effective specialist that can assist you with your well treatment needs so you can rest certain that your water is clean, hygienic, and functioning properly.